Installation
-
Using the included screws and optional anchors*, affix the mounting plate to the wall with the widest side pointing up. It'll look like Mickey Mouse with screws for ears.
-
There is a corresponding steel piece within the backplate. It will hold the fixture in place by sliding down into the wall plate from above.
-
We usually ship the fixture with the bulb already in place. If it is not in place already, insert it now by firmly pressing it into the socket.
-
Thread the glass globe onto the socket. Be mindful not to cross-thread, with proper alignment the globe will easily screw onto the socket. Do not over-tighten.
-
Plug-in and enjoy!
*The included anchors are intended for use with drywall, plaster, or panelling. They will require 3/16" pilot holes.
Care
Wipe with a soft, dry cloth. Avoid any harsh cleaning chemicals as they will damage the finish.
Thank you
Thanks so much for supporting our little studio!
As a thank-you for your support, please use discount code HELLOAGAIN for a small discount on your next order :)