Installation
-
Use the included hex-key to loosen the slip ring at the base of the fixture. Slide the ring and backplate up the arm.
-
Mark the location of the screw-holes on the wall.
-
Drill 3/16" pilot holes and insert the blue anchors*
-
Use the included screws to affix the TP holder to the wall.
-
Slide the backplate and ring towards the wall and re-tighten the slip ring to hold everything in place.
*The included anchor is intended for use in drywall, plaster, or paneling. You may need to source your own hardware if installing into a different material.
Care
Natural brass will darken and patina with age. I think this is beautiful - natural brass is impossible to replicate. If ever you'd like to remove the patina I recommend using Brasso or Barkeeper's Friend.
Thank you
Thanks so much for supporting our little studio! Please don't hesitate to reach out with any questions.
As a thank-you for your support, please use discount code HELLOAGAIN for a small discount on your next order :)